|
|
|
 |
MagicEzy 9 Second Chip Fix™ is a revolutionary nano filler that repairs and colors cavities… FAST. It’s one-part formula and built-in leveler make it super easy to use. Available in 11 colors. Repairs guaranteed for 3 years. |
- Overview
- How to Use
- Customer Reviews
- MSDS
- 12.9mL / 0.43 fl OZ resealable tube (6 month shelf life once opened)
- Superior strength and adhesion#
- Easy to use
- No sanding. No mixing. No Odor.
- Available in 11 colors
- 30 day money-back satisfaction guarantee
- Repairs guaranteed for 3 years
- Fiberglass / Gelcoat – Boats, jet skis, kayaks, RVs
- Ceramics & Stone – Tiles, bench tops, vanities
- Showers, baths, basins & vanities
- Most plastics* – Canoes, kayaks, dinghies
- Aluminum and metal* – Boats, cars, appliances
- Wood
#During laboratory testing, MagicEzy 9 Second Chip Fix outperformed several leading fibreglass / gelcoat repair brands by displaying greater adhesion strength and superior flexibility.
Available colors:
Step 1: Prepare
- Do not use below 10°C / 50°F
- Suitable for above the waterline use.
- Wash/scrub with soapy water into damage, then rinse with clean water. Allow to fully dry in sun or accelerate dry with a hairdryer.
- Rotate/shake the tube for 30 seconds for even consistency.
COLOR MATCH?
Mix two or more colors on a clear plastic wrap. View new color when placed over the surface.
Step 2: Apply
- For plastic or aluminum surfaces, apply a thin coat of MagicEzy MegaFusion Primer/Sealant and allow 2 hours to cure (at 70ºF/20º C).
- APPLY and overfill the damage, whilst holding a tissue in your spare hand.
HOW DO I APPLY ON VERTICAL SURFACES?
To prevent slump or for a FAST dry time, use a hairdryer for 3 minutes to form a skin.
Step 3: Level
- LEVEL at 90º. A gentle touch is required (as if the ‘LEVEL’ is floating on air).
HOW DO I GET A GLOSS FINISH?
MagicEzy 9 Second Chip Fix dries matte. Add a thin top coat of MagicEzy Hairline Fix for gloss.
Step 4: Trim
- Clean ‘Level’ with the tissue then TRIM smears around the repair using the level (not the repair itself). Repeat TRIM if necessary. Avoid excessive tampering.
Notes
- DRYING time varies depending on temperature. FAST DRY using a hot hair dryer for 3 minutes + 30minutes cool down. NORMAL DRY 2 hours (at 70ºF/20º C). It will harden overnight and achieve maximum strength and adhesion after 14 days. A second application of 9 Second Chip Fix may be required.
- DEEP DAMAGE Apply in ¼ inch (6mm) layers and allow to DRY for 2 hours at 70ºF/20º C or 3 minutes using a hairdryer (plus 30mins cool down) then apply the next layer.
HOW DO I APPLY IN HOT/COLD WEATHER?
In temperatures above 90ºF (30ºC) lay a damp towel over the area until hand temperature is reached. Below 60ºF /15ºC, set with hairdryer for 3 minutes.
