1. All fiberglass surfaces (above the waterline) including:
- Boats
- Pontoons
- Sailboards
- Showers
- Baths
- Sinks
2. All fiberglass parts of a boat including:
- Decks
- Non-skid areas
- Hulls
- Damaged spars
- Transom and transom edges
- Oars
- Split bindings
3. *PVC, Carbon Fiber, Aluminum and Composite Plastics including:
- Canoes & Kayaks
- PWCs
- Snow mobiles
- Aluminum boats
*Apply a base coat of Mega Fusion Primer Sealant first to plastic and aluminium surfaces. Mega Fusion is an industrial strength primer / sealant that coats composite materials such as plastics, carbon fiber and aluminum. These damaged surfaces can then be repaired using MagicEzy 9 Second Chip Fix and Hairline Fix. It has extremely high levels of adhesion so for unstable fiberglass it can be also used as a base coat for extra repair strength.
- Hairline cracks
- Stress cracks
- Gelcoat crazing
- Fine scratches
- Shallow gelcoat nicks
- Plus use it as a gloss top coat for MagicEzy 9 Second Chip Fix repairs
We recommend you use MagicEzy 9 Second Chip Fix instead which has a higher fill rate and is specifically designed for these types of damage.
Yes, it can be used on:
*when using on plastic or aluminum surfaces, apply a primer coat of MagicEzy Mega Fusion first.
- Boats
- Surf skis*
- Jet skis*
- Porcelain
- Rubber seals
There are many different color boats available and although your boat may originally have been a certain model and color finish, many things affect this over time such as age, fading etc. It is best to match the existing color of your boat to our color chart.
Snow White is our most popular white. It is a pure white. Both Snow White and Matterhorn White are gray based whites. Our cream based whites are Oyster White, Eggshell White followed by Cream.
If you are unsure, it is best to select a shade slightly lighter rather than darker, as darker repairs may appear as a shadow and draw your eye to the repair area more.
We have found it easy to mix the colors together on a plastic lid using the level end of the tube. When you have achieved the desired color, apply the product with the end of the tube. Or mix enough of each color in some transparent sandwich / plastic wrap then place next to the damage to match the color.
No. Mixing additional products compromises the adhesion and effectiveness of MagicEzy products. We do not guarantee any products that have been mixed with other additives. However, two of our products can be mixed together to achieve an appropriate color match.
Ideally, we recommend two or more colors of the same product be mixed together. Whilst the products are compatible with each other, mixing different consistencies may achieve a different finished repair.
No . . .we do not have yellow at this point. We may add additional popular colors to the range.
Please see our Tips & Secrets Brochure or watch our How To Video
No. The only prepping required is that you clean and dry the surface. No sanding is required, however if the cracks appear daker than the surface, use a pin to clean the dirt out of each crack before applying the product. This will make sure that the product can penitrate and seal the crack.